Kenwood TH-K2E - Manual (Page 107)

93
• Press [MONI/SQL] to delete the character at the
current cursor position.
• If no Power-ON Message is programmed, “TH-K2” or
“TH-K4” appears as the Power-ON Message.
7 To complete the entry, press [MENU] without
selecting a character. Otherwise press [PTT] to
cancel the entry.
P
ROGRAMMABLE
VFO
If you want to limit the operating frequencies within a
certain range, program the upper and lower frequency
limits to the programmable VFO parameters. For
example, if you select 144 MHz for the lower limit and
145 MHz for the upper limit, the tunable range will be
limited from 144.000 MHz to 145.995 MHz.
1 Press [VFO].
2 Press [MENU].
3 Turn the Tuning control to select Menu No. 7
(P.VFO).
• The current programmable frequency range for the
band appears.
4 Press [MENU].
5 Turn the Tuning control to select the lower limit
frequency in MHz.
6 Press [MENU] to store the lower limit frequency. To
cancel, press [PTT].