Kenwood TH-K2E - Manual (Page 37)

23
Example 5 (Short cut)
To change 144.650 MHz to 145.650 MHz:
Key in
Display
1 4 4. 6 5 0
[#] – – – – – –
[5] 5 – – – – –
[ ] 1 4 5. – – –
[VFO] 1 4 5. 6 5 0
Example 6
To change 145.200 MHz to 145.750 MHz:
Key in
Display
1 4 5. 2 0 0
[#] – – – – – –
[ ] 1 4 5. – – –
[7], [5], [0] 1 4 5. 7 5 0
Note:
◆ If the entered frequency does not match the current
frequency step size, the frequency is automatically rounded
down to the next available frequency.
◆ When the desired frequency cannot be entered exactly,
confirm the frequency step size {page 86}.
◆ If you turn the Tuning control while entering the frequency,
the transceiver clears the entry and changes to the next
available frequency.