Kenwood TH-K2E - Manual (Page 49)

35
3 Press [MENU].
4 Turn the Tuning control to select “TONE”.
5 Press [MENU] to store the setting or [PTT] to
cancel.
6 Press any key other than [LAMP], [MONI/SQL],
and [MENU] to exit Menu Mode.
• “T” appears when the Tone function is ON.
Note: You cannot use the Tone and CTCSS/ DCS functions at
the same time. Switching the Tone function ON after activating
the CTCSS/ DCS deactivates the CTCSS/ DCS function.
TH-K2E/ ET/ K4E only: When you access repeaters that require
a 1750 Hz tone, you do not need to activate the Tone function.
Simply press [CALL] without pressing [PTT] switch to transmit a
1750 Hz tone (default setting).
■ Selecting a Tone Frequency
1 Press [MENU].
2 Turn the Tuning control to select Menu No. 3 (T).
3 Press [MENU].
4 Turn the Tuning control to select the desired tone
frequency.
5 Press [MENU] to store the setting or [PTT] to
cancel.
6 Press any key other than [LAMP], [MONI/SQL],
and [MENU] to exit Menu Mode.