Bluetooth – Kyocera S4000 User Manual
Page 56
48
Bluetooth®
Bluetooth
®
The Bluetooth
®
wireless technology on your
phone enables wireless connectivity with
accessories such as portable or installed hands-
free car kits, headsets, handsets, computers,
PC cards and adapters, PDAs, and speakers. You
must use a Bluetooth wireless technology device
(compatible with Class 2 Bluetooth wireless
technology, version 1.2) in order to use this
phone wirelessly. Bluetooth wireless technology
accessories have the symbol. For additional
information on carrier-supported profiles and
third-party accessory compatibility for
Bluetooth wireless technology, visit
www.kyocera-wireless.com/support.
Turning Bluetooth on
You must turn on your phone’s Bluetooth feature
to use it with Bluetooth devices. Select
Settings
>
Bluetooth
>
On/Off
and one of the following:
•
On Visible
allows other devices to find
your phone.
•
On Invisible
hides your phone for all devices
except those listed in your My Devices.
•
Off
prohibits your phone from being used
with any Bluetooth device. To prolong battery
life, it is recommended to set
Bluetooth
to
Off
when you are not using it.
When you turn on Bluetooth the first time, you are
prompted to do a device search. Then you can
pair with a device.
Pairing
You must first “pair” your phone with the
Bluetooth wireless technology enabled device to
allow your phone to communicate with it. Refer to
the following instructions for setting up Bluetooth
wireless technology in conjunction with the user
guide provided with your Bluetooth device.
1.
Select
Settings
>
Bluetooth
>
On/Off
>
On Visible
or
On Invisible
.
2.
Prepare the Bluetooth device (Bluetooth
accessory) for pairing as described in the
other device’s user guide.
3.
Select
Settings
>
Bluetooth
>
My Devices
>
Find New
. Your phone then searches and
detects visible Bluetooth wireless technology
enabled devices in the vicinity.
4.
With devices found, select
Add
to see the list.
5.
Highlight your desired device and select
Add
.
Note: When pairing is initiated from another
Bluetooth device, you are prompted to
accept or reject the pairing.
6.
If necessary, enter the password provided
in the Bluetooth device’s user guide and
select
OK
.
Your phone waits for the device’s response.
With the password accepted, the device
shows in
My Devices
.
82-K6562-1EN.book Page 48 Sunday, April 13, 2008 9:31 PM