Kyocera KM-2540 - Manual (Page 85)

Troubleshooting 6-3
Copies are skewed. Are the originals loaded correctly? When placing originals on the platen,
place them face-down and flush
against the original size indicator
plates. page 2-14
When placing originals in the
document processor, align the original
width guides securely before placing
the originals. page 2-15
Is the paper loaded correctly? Check the position of the paper width
guides. page 2-2
Paper jams frequently
occur. Is the paper loaded correctly? Load the paper correctly. page 2-2
Is the paper of the supported type? Is it
in good condition? Remove the paper from the cassette,
turn it over, and reload it. page 2-2
Is the paper curled, folded, or
wrinkled? Replace the paper with new paper. page 2-2
Are there any loose scraps or jammed
paper in the machine? Remove any jammed paper. page 6-8
Is the paper damp? Replace the paper with new paper. page 2-2
Copies from the optional
document processor
have black lines. Is the slit glass dirty? Clean the slit glass. page 5-2
Copies are wrinkled. Is the separator dirty? Clean the separator. page 5-3
Is the paper damp? Replace the paper with new paper. page 2-2
Is the paper set in a proper orientation? Change the orientation in which the
paper is positioned.
—
Symptom Checkpoints Corrective Actions
Reference
Page