Kyocera KM-2540 - Manual (Page 40)

2-14 Preparation for Usage
Loading Originals
Follow the steps below to load originals for copying.
Loading Originals on the Platen
You may place books or magazines on the platen in addition to ordinary
sheet originals.
1
Open the original cover.
2
Place the original. Put the scanning side facedown and align it flush
against the original size indicator plates with the back left corner as
the reference point.
Original size indicator plates (Inch models)
Note Open the optional document processor instead if
installed. Before opening the document processor, be sure
that there are no originals left on the original table or on the
original eject table. Left originals may fall off when the
document processor is opened.
Keep the document processor open if the original is 40 mm or
thicker.