Kyocera KM-2540 - Manual (Page 74)

5-4 Maintenance
5
Replace the cleaning brush and close the front cover and left cover
1.
Transfer Roller
To maintain the best possible print quality, clean the machine as
described below on a regular basis (once a month).
1
Open the front cover.
2
Remove cleaning brush (blue colored).
3
Pull up left cover 1 lever and open left cover 1.
4
Run the brush from side to side along the transfer roller as shown,
rotating by the gear at the end, to remove any soiling.
IMPORTANT Push in the position indicated to ensure that left
cover 1 is securely closed.