Kyocera KM-2540 - Manual (Page 32)

2-6 Preparation for Usage
Loading Envelopes
Up to 20 envelopes may be loaded in the MP tray.
Acceptable envelope sizes are as follows.
1
Open the MP tray.
2
Adjust the paper width guides to the width of the envelope.
3
For landscape form envelopes, close the flap. Insert the envelope all
the way along the width guides, keeping the printing side face-up
and the flap closed.
For portrait form envelopes, open the flap. Insert the envelope all the
way along the width guides, keeping the printing side face-up and
the flap positioned opposite to the entrance.
Acceptable Envelope Size
Monarch 3 7/8 × 7 1/2"
Comm. #10 4 1/8 × 9 1/2"
Envelope DL 110 × 220 mm
Envelope C5 162 × 229 mm
Executive 7 1/4 × 10 1/2"
Comm. #9 3 7/8 × 8 7/8"
Comm. #6-3/4 3 5/8 × 6 1/2"
ISO B5 176 × 250 mm
Envelope C4 229 × 324 mm
Oufuku Hagaki 148 × 200 mm
Youkei 2 162 × 114 mm
Youkei 4 234 × 105 mm
IMPORTANT How envelopes are loaded (orientation and facing)
will differ depending on the type of envelope. Be sure to load them
correctly, otherwise they may be printed in the wrong direction or
on the wrong face.
Note When you load envelopes in the MP tray, select the
envelope type by referring to Specifying the Media Type for the
MP Tray on page 2-13.