Kyocera KM-2540 - Manual (Page 101)

Troubleshooting 6-19
Optional Document Finisher
If a misfeed occurs in the optional document finisher, refer to the
Document Finisher Operation Guide to clear the jam.
Optional Job Separator
Follow the steps below to clear paper jams in the optional job separator.
1
If jammed paper can be seen through the paper output slot, pull it
out toward you.
If the paper tears, remove every loose scrap from inside the
machine.
2
Pull up left cover 1 lever and open left cover 1.
3
Remove the jammed paper.
If the paper tears, remove every loose scrap from inside the
machine.
4
Press the indicated position to close left cover 1.