Kenwood TH-G71E - Manual (Page 36)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
30
PRIORITY SCAN
You may sometimes want to monitor your favorite
frequency on one band while operating on another band.
Use Priority Scan. This Scan always monitors your
favorite frequency in the background. When receiving
signals on your specific frequency, the transceiver
immediately recalls that frequency on the display and
allows you to use it for QSO. First store your favorite
frequency in the Priority channel and select one of the
two Priority Scan methods.
Note: If you do not operate any control or key for 3 seconds after signals
drop, the transceiver resumes Priority Scan.
■ Storing Frequency in Priority Channel
1 Select the desired band.
2 Select the desired frequency.
3 Press [F].
• A memory channel number appears and blinks.
4 Turn the Tuning control to select the Priority
channel.
• “Pr” appears when you select the Priority channel.
5 Press [MR].
Note: Not only can you store data in the Priority channel, but you
can also overwrite existing data with new data.
144.950 MHz