Kenwood TH-G71E - Manual (Page 20)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
14
■ Activating Tone Function
1 Select the desired band.
2 Press [F], [LOW] to switch the Tone function ON
(or OFF).
• “T” appears when the Tone function is ON.
Note: You cannot use the Tone and CTCSS functions
simultaneously. Switching the Tone function ON after activating the
CTCSS deactivates the CTCSS.
TH-G71E only: When you access repeaters that require 1750 Hz
tones, you need not activate the Tone function. No matter which
selection you make here, pressing [LOW] while pressing the PTT
switch or simply pressing [LOW] causes the transceiver to transmit
1750 Hz tones.
■ Selecting a Tone Frequency
1 Select the desired band.
2 Press [F], [LOW] to activate the Tone function.
• “T” appears.
3 Press [F], [9].
• The current tone frequency appears and blinks.
4 Turn the Tuning control to select a tone
frequency.
5 Press any key other than [LAMP] and [MONI] to
complete the setting.
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
Freq. (Hz) Freq. (Hz) Freq. (Hz) Freq. (Hz)
TH-G71E only: To transmit 1750 Hz tones, press and hold the PTT
switch, then press [LOW], or simply press and hold [LOW]. Releasing
[LOW]
quits transmitting 1750 Hz tones.
2
1
2
1