Kenwood TH-G71E User Manual
Page 21
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
■
Automatic Repeater Offset
(U.S.A./ Canada/ Europe Only)
This function automatically selects an offset direction
and activates the Tone function, according to the
frequency that you select on the VHF band. The
transceiver is programmed for offset direction as
shown below. To obtain an up-to-date band plan for
repeater offset direction, contact your national
Amateur Radio association.
U.S.A. and Canada versions
This complies with the standard ARRL band plan.
European versions
Note:
Automatic Repeater Offset does not function when Reverse is
ON. However, pressing [REV] after Automatic Repeater Offset has
selected an offset (split) status, exchanges the receive and transmit
frequencies.
1
Press [F], [BAND] to enter Menu mode.
2
Select Menu No. 7 (ARO).
3
Press [BAND] to switch the function ON (default)
or OFF.
4
Press any key other than [BAND], [LAMP], and
[MONI]
to exit Menu mode.
+
−
−
−
+
S
S
S
S
144.0 145.5 146.4 147.0 147.6
145.1 146.0 146.6 147.4 148.0 MHz
S: Simplex
S
S
S: Simplex
–
144.0
145.6
145.8
146.0 MHz