Konica Minolta C550 - Manual (Page 105)

3 Using fax/scan functions
3-4 C550
U
s
in
g fax
/sc
an
f
u
n
c
tio
n
s
Chapter 3
5
Press the [Start] key.
– If the machine is set to display the transmission
result report screen, a screen appears,
requesting confirmation to print the transmission
result report. To print the transmission result
report, touch [Yes], and then touch [OK].
– To stop the transmission, press the [Stop] key.
– Pressing the [Stop] key during scanning
temporarily stops the scan operation.
Scanning of the document begins, and then the fax
is sent.
!
Detail
If the “Destination Check Display Function” parameter
was set to “ON”, the Destination Settings screen
appears. Check the destinations, and then touch [Send].
If the machine is set to print the transmission result
report, the transmission result report is printed if the
transmission could not be completed.