Kenwood DV-6050 - Manual (Page 49)

49
Chapter 6: Various Setups
V
arious Setups
Icon Function Icon Means
Initial
Position
Operation procedure
1. While the player is in stop mode, press the SET UP
button and press the cursor up/down button to display
the "SOUND" menu of "SET UP MENU".
2. Press the ENTER button to open the setup screen.
EXIT MENU
Digital Audio
Dolby Digital
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
DTS
MPEG
PCM Down Conversion
SOUND
7 On
7 Bitstream
7 Bitstream
7 Bitstream
7 On
7 Normal
7 Filter 60kHz
3. In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up/down button
and press the ENTER button.
4. Select the Setting Item (refer to Right Table) by
pressing the cursor up/down button, then press the
ENTER button to enter the selection in memory.
¶ " " : Select to return to the previous screen.
Switches on/off the audio during
search.
÷ Audio is output only in the first
speed step of fast forward.
Audio During
Search On
Off
On
Switches the dynamic range
control function.
This function compress the
difference between max. and min.
volume, and makes it easier to
listen dialogue at low volume.
This function only works with
Dolby Digital DVD.
Dynamic Range
Control Wide
Normal
Midnight
Normal
This function is OFF. Set plays the audio at the
level recorded in the disc.
This function works with Low compression
ratio.
This function works with High compression
ratio.
Sets the audio filters for protecting
the connected speakers. Audio Filter Filter 60 kHz
Filter 110 kHz
Select when the speakers in use are not suitable
for reproduction of high frequencies.
Select when the speakers in use are suitable for
reproduction of high frequencies.
Filter 60 kHz
Table : SET UP MENU "SOUND" Function & Setting (2/2)
Function Item Setting Item