Kenwood DV-6050 - Manual (Page 44)

44
Chapter 6: Various Setups
V
arious Setups
Basic Operations in Setup Screen
The "SET UP MENU" includes the "MAIN", "SOUND"
and "VISUAL" menus. When a setup screen is displayed,
select the desired item according to the purpose.
If the power is turned off while the setup screen remains
displayed after setting changes, the changes will be
invalid. Be sure to close the setup screen before turning
power off.
Operation procedure
1. Press the SET UP button to open the "SET UP MENU"
in which "MAIN" is displayed.
M A I N
SET UP MENU
EXIT
Press the cursor up/down button to switch the dis-
played menu name to "SOUND" or "VISUAL".
¶ When you press the RETURN button or press the
cursor button in the direction of arrow "EXIT"
while the "SET UP MENU" screen is displayed, the
setup mode can be canceled.
2. Press the ENTER button to open the setup screen.
¶ While a setup screen is displayed, pressing the
cursor button toward "EXIT" allows the setup
mode to be canceled and pressing it toward
"MENU" returns to the "SET UP MENU".
3. Select the desired item by pressing the cursor button in
the required direction, then press the ENTER button to
open the setup change screen.
4. Select a setting by pressing the cursor button in the
required direction and press the ENTER button to
enter the change in memory.
¶ Press the RETURN button or press the cursor left
button to return to the setup screen.
For actual setup operations, see page 45 and after.