Kenwood DV-6050 - Manual (Page 46)

46
Chapter 6: Various Setups
V
arious Setups
Operation procedure
1. While the player is in stop mode, press the SET UP
button to display the "MAIN" menu of "SET UP
MENU".
2. Press the ENTER button to open the setup screen.
OSD Position 7 Normal
On Screen Message 7 On
IPB Display 7 Off
MAIN
EXIT MENU
7 Level 8
TV Aspect
TV Mode
TV Monitor Type
7 4:3
7 Letterbox
7 Standard
7 Off DVD VIDEO Mode
Rating
3. In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up/down button
and press the ENTER button.
4. Select the Setting Item (refer to Right Table) by
pressing the cursor up/down button, then press the
ENTER button to enter the selection in memory.
¶ " " : Select to return to the previous screen.
Sets the play mode of DVD discs. DVD VIDEO
Mode
Off *
* This setting is reset to default "Off" when the disc is changed or the power is set to off or standby.
On
Off
Sets the position of the OSD (On-
Screen Display). OSD Position
Normal
Select to display the OSD and messages on the
top of the TV screen. Usually select this setting.
Select to display the OSD and messages on the
lower part of the TV screen. Select this setting
when the OSD or messages are deviated outside
the TV screen.
Normal
Cinema
Icon Function Icon Means
Initial
Position
Switches the on-screen message on/
off. On Screen
Message
On
Select to display on-screen messages.
Select to not to display on-screen messages.
On
Off
Switches the IPB display on/off. IPB Display
Off
Select to view the IPB display.
Select to not to view the IPB display.
On
Off
Table : SET UP MENU "MAIN" Function & Setting (2/2)
Function Item Setting Item
Select to play only the DVD VIDEO part in a
DVD VIDEO/DVD AUDIO mixed disc.
Select to play only the DVD AUDIO part in a
DVD VIDEO/DVD AUDIO mixed disc.