Kenwood DV-6050 - Manual (Page 21)

21
Chapter 3: Basic Operation
Basic Operation
Configuration of Discs
DVD AUDIO disc configuration
DVD AUDIO
Group 1 Group 2
Track 1 2 2 3 4 5
2 2 3 4 5 Index 1
Track 1 2 2
DVD VIDEO disc configuration
The group is the largest unit composing the music in an
DVD AUDIO disc. Each group is composed of multiple
tracks, and each track is composed of multiple indices.
DVD VIDEO
Title 1 Title 2
Chapter 1 2 2 3 4 5 Chapter 1 2 2
CD, VCD
Track 1 2 2 3 4 5
The title is the largest unit composing the music and/or
pictures in an DVD VIDEO disc. Each title is composed of
multiple chapters.
CD and VCD disc configuration
MP3 disc configuration
MP3 disc
Folder 1 Folder 2
File 1 2 2 3 4 5 6 7 File 8 2 10 2 9
Turning power on
1. If preparation of the TV is required :
Set the input selector of the TV to monitor the video
output from this unit.
If preparation of the AV amplifier is required :
Set the input selector of the AV amplifier to monitor
the audio output from this unit.
2. Press the POWER ON/OFF button on the player.
When the power of the player is in the standby mode,
press the POWER button on the remote.
¶ When the player is turned on, it reads the discs in
the tray and controls the lighting of the DISC 1 to
5 buttons/indicators to inform the user of presence
and absence of discs. If there is any disc in the tray
at this moment, the unit will play it automatically.
¶ "NO PLAY" is displayed when the loaded disc is
not playable on this player.
[To put the player power in the standby mode]
¶ When the power is on, press the POWER button
on the remote. The "STANDBY" indicator lights
up to indicate that the player is in the standby
mode of power.
[To turn the player off]
¶ When the power is on or standby, press the
POWER ON/OFF button on the player main unit
to turn it off.
The folder is the storage unit at the highest level in the
disc. Sometimes a single folder contains more than one
file, or sometimes files are recorded directly in the disc in
place of being included in a folder. Some discs also have a
hierarchical structure in which a folder includes sub-folders.
Note that the file numbers are not assigned on a per-folder
basis but they are assigned consecutively for all the files in
the whole disc.
STANDBY mode:
While the standby indicator is lit, a small amount of
power is supplied to the system to back up the memory.
This is called standby mode. Under the condition, the
system can be turned ON by the remote control unit.