Switching the play modes, Program playback, Registering and playing the program – Kenwood DV-6050 User Manual

Page 40: Applied operations

Chapter 5: Applied Operations

Applied Operations

Program Playback

Desired tracks in a desired disc can be programmed in
the desired order. (Program playback is not available with
DVD VIDEO, MP3 disc.)

Registering and playing the program

Insert all of the discs to be used in programming in the
tray, close it and press the DISC 1 to 5 buttons so that
the player reads the disc information by playing each
disc until display "READING" disappears. (If the tray is
opened after this, the above procedure should be
repeated so that the player reads all disc information
again.)

In stop mode, press the PGM button.

Disc

Group

Track

Press PGM to
TRACK MODE

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

PROGRAM MODE

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

Last Clear

Play

All Clear

¶ When the player enters the program mode, the

screen as shown in the figure appears and the
"PROG." indicator in the display lights to indicate
that the player is in the program mode.

¶ Newly programmed tracks are appended to the end

of the existing program.

Select a disc by pressing one of the DISC 1 to 5 button.

¶ If you commit a mistake in the numeric button

input, press the CLEAR button and restart the input
from the beginning.

¶ It is also possible to enter the disc number alone

without selecting a group and/or track number in
the program list. In this case, all of the tracks in
the disc will be played back.

With a DVD AUDIO, select a group by pressing one

of 0 to 9 buttons on the remote.

¶ It is also possible to enter the disc number and

group number in the program list without selecting
a track number. In this case, all of the tracks in the
group will be played back.

Select a track number with 0 to 9 and +10 button.

Press the ENTER button to enter the track in the pro-

gram list.

¶ Up to 32 tracks can be programmed by repeating

steps 2 to 5 for each.

Select

Play

in the screen using the cursor up/down

button, then press the ENTER button to start program

playback.

¶ When the 4 or ¢ button is pressed during

playback, the track will be skipped in the direction
of the pressed button.

Switching the Play Modes

The play modes of the player include the program mode,
disc random mode and all random mode in addition to
the track mode for normal playback.

Select the desired play mode and enjoy disc playback in
many ways.

Program mode : Desired tracks in a desired disc can

be programmed in the desired order.

Random mode : Tracks can be played in a random

order.

Disc random mode : Tracks in a desired disc can
be played in a random order.

All random mode : Tracks in all discs in the stocker
can be played in a random order.

¶ This function may be unavailable with certain discs.
¶ Some operations may be restricted depending on

the played disc or player status.

¶ When the played disc is a P.B.C.-compatible VCD,

its P.B.C. is on and you want to switch the play
mode, stop the player, press the TOP MENU/PBC
button to switch it off.

∞