Kodak 2500 - Manual (Page 68)

A-63055 December 1999 62
Stop at Skew When Stop at Skew is enabled, the scanner stops scanning when a
skewed document is detected.
NOTE: This feature is available only on the Scanner 1500.
Manual Feed Manual Feed allows you to configure the feeder in different ways, from
a manual feed mode so you can scan pages one by one, to a mode
where you only have to place paper in the feeder to begin scanning.
Check the Enable box and choose a Manual Feed mode:
•
All Pages—when documents are placed in the feed tray, scanning
starts automatically. When scanning is finished, the scanner waits
for more documents. Scanning starts again after you place more
documents in the feed tray.
• All Pages and Wait till user pushes key—place documents in the
feed tray and press the scanner’s Stop/Start button to start
scanning. When scanning is finished, the scanner waits for more
documents. Scanning starts again after you place more documents
in the feed tray and press the scanner’s Stop/Start button.
• 1 Page—you can insert documents one by one. Insertion of a
document starts scanning.
Manual Timeout—when you enable Manual Feed , Manual Timeout is
also enabled. You can specify a time delay setting from 1–300
seconds. The default is 300 seconds (5 minutes). If a document is not
fed manually within the specified time, the scanner returns to automatic
feeding mode.