Kodak 2500 - Manual (Page 67)

A-63055 December 1999 61
Fit to Page Selecting Fit to Page allows you to specify whether documents are
scanned at actual size or reduced (Fit to Page) size.
Normally, the scanner scans at 100% of the actual page size. Some of
the data on the edges of the page may be lost. When
Fit to Page is
enabled, the scanner shrinks the image to fit the scanned page.
Slow Feeding Slow Feeding allows you to change the feeder speed in order to scan
a thin, folded, creased, or curled document in the automatic document
feeder. Before scanning, straighten the document and select the
Slow
Feeding check box.
Detect Paper Size When Detect Paper Size is enabled in the More Settings dialog box
for the Scanner 2500, different sized paper can be scanned without
having to reconfigure the
Paper Size function. Size is determined by
paper width, not length.
This feature detects the following paper sizes: Legal, Letter, A3, A4,
A5, A6, B4, B5, and B6.
Set documents of different sizes on the left side of the feeder. The
scanner detects the document size by the document guide positions.
Detect Double Feed When Detect Double Feed is enabled, multiple feed documents (two
or more documents scanned simultaneously) will be detected.
Sensitivity—when you enable Detect Double Feed , Sensitivity is also
enabled. Select one of the following detection sensitivities:
• High—select this when you scan thick paper.
• Low—select this when you scan thin paper.
• Normal—select this when you scan standard paper.
NOTES: The scanner uses an ultrasonic wave to detect multiple feed
documents. Document thickness and wrinkles may cause
false reads.
When you scan important documents, check the number of
sheets of a document and the number of scanned images to
verify that all documents have been scanned.