Kodak 2500 - Manual (Page 36)

A-63055 December 1999 30
9. Set the barcode area:
•
X-Position to Begin Search—must be 10 mm (0.39 inches) to
the left of the first barcode data to be read.
•
Y-Position to Begin Search—the length from the top of the
document to the upper edge of the barcode.
• Width of area on page to search—set this value 20 mm
(0.79 inches) greater than the actual width of the barcode.
• Length of area on page to search—set this value equal to the
entire barcode search length. If the search area is large
(e.g., an 8.5 x 11-inch region) then the scanning time will
increase considerably.
uly Y coordinate
X coordinate
ulx
Width
10 mm
Length (>10 mm)
Document
10 mm