Kodak 2500 - Manual (Page 29)

A-63055 December 1999 23
White Level
From Paper When White Level From Paper is on, the first 3 mm of each
document is analyzed and the background brightness level is adjusted
so the background of the scanned document becomes white.
White
Level From Paper is “Off” when Dither or Grayscale is enabled.
• Auto—when Dither and Binary are set to “None,” white level is set
from a preset white color definition.
• On—white level is set from the first 3 mm of a scanned document.
•
Off—white level is set according to the white level calibration strip
in the scanner (not the scanned document).
Original
Auto
On
Off
If you scan colored paper (such as red or blue), the scanned paper’s
background color may cause the noise level to increase.
NOTE: The document color 3 mm from the upper edge is detected. If
a document contains colors that are different from the 3 mm
sampled section color, this function may not work correctly.