Kenwood C-V751 - Manual (Page 5)

5
System connection
ANTENNA AM
FM 75 Ω
GND
UNSWITCHED
CONNECT
WITH
POWER AMPLIFIER
SYSTEM
CONTROL
FRONT SURROUND CENTER
PREOUT
SUB WOOFER
L
R
REC PLAY
REC PLAY
PLAY PLAY
PLAY
PLAY
DVD/
6CH.INPUT
MONITOR
OUT
REC PLAY REC
VIDEO 1 VIDEO 2
VIDEO
FRONT SURROUND CENTER
SUB WOOFER
CD MD/TAPE1 TAPE 2/MON
CD
(OPTICAL 1)
DVD
(COAXAL)
DVD/6CH.INPUT
DIGITAL IN
REC IN
PLAY
OUT REC
IN
PLAY
OUT
Also connect the system control cords when the
KENWOOD Audio Component System “SERIES 21” is
connected.
The connected components shown here are given as examples
because the available models vary depending on marketing areas.
System connection
Connection of audio components
(CD player, MD recorder, cassette deck, power amplifier)
Make connection as shown below.
When connecting the related system components, refer
also to the instruction manuals of the related compo-
nents.
Do not plug in the power lead until all connections are
completed.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
Œ
System control cord
To wall
AC outlet
* 2 Cassette deck 2
MD recorder or
Cassette deck 1
* 1 Power amplifier
M-A300
CD player
Caution regarding placement
Be sure to adhere followings. Or proper ventilation will be
blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of
unit.
÷ Leave a space around the unit (from the largest outside dimension
including projection) equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
* 2 Do not connect system control cord to the cassette
deck connected to the TAPE 2/MONITOR jacks.
Shape of AC outlet
Australia x 1
* 1 For the connection and operation proce-
dures of the power amplifier and speak-
ers, refer to the instruction manual of
the power amplifier (M-A300).
Connection
cable
LINE
OUTPUT
Optical fiber cable
DIGITAL IN jack
Remove the protective cap
before using the DIGITAL IN
jack.
System control cord
Remove cap