Kenwood C-V751 - Manual (Page 10)

10
System connection
OPEN/CLOSE
Note Note
Opening/closing the door
When opening or closing the door, be careful not to catch
your finger in the door. Otherwise there is a risk of injury.
Changing the input selection display (AUTO key)
To make the system control operation, the input selection display should be switched according to the actually connected components.
About the system control connections
8
Each press switches the indication.
1 Select “DVD” with the INPUT SELECTOR .
Main unit GRC
INPUT
EMO AUTO BAND 3 Press and hold the AUTO key for more
than 2 seconds, until “DVD 6ch” is
displayed. (Main unit only)
m
o
v i e
To change the DVD display into the DVD 6CH display or LD display.
Analog input
Each press switches the indication.
Digital input
1 DVD 2 LD
2 Press the INPUT MODE key.
INPUT MODE
lis
te
n
mode
Select the “Input Analog” icon.
1 Press the ON/STANDBY key to ON.
ON/STANDBY
2 Opening/closing the door
1 DVD 2 DVD 6ch 3 LD
Using DVD 6ch INPUT