beautypg.com

C c h + 1 ) d b, 10 f t 4.5, Adjust the input level. (analog sources only) – Kenwood C-V751 User Manual

Page 26: Speaker settings

background image

26

Speaker settings

÷ The test tones is not output from the speaker which has been set to

off. "Speaker settings"

£

3 Adjust the levels of all the speakers than

the front speakers (left, right).

While test tone is output from a speaker,
adjust the volume level of the speaker.

GRC

Display when test tone is output from a surround speaker

÷ Be sure to adjust from the listening position.

÷ Each press of the key increases or decrease the level by 1 dB.

÷ To set the subwoofer level, listen to familiar music or films that have

strong bass content and adjust the subwoofer level until it sounds
balanced with the rest of the speakers.

÷ When the volume level is increased during the “Test Tone” operation

and it is finished while the volume level is high, the increased volume
level will be maintained.

KHz TIMER 1 2

F M

LW

MW

AUTO SOUND

S

PRO LOGIC

A M

MHz SLEEP

DTS DOLBY

C c h + 1 ) d B

4 Repeat 3 until all the system's speakers

(except the subwoofer) play at the same
volume.

To decrease
level

To increase
level

5 Press the “Test Tone” icon.

Adjust the input level. (analog sources only)

5

1 Select the “music” or “movie” icon in

the fixed segment screen.

m

o

v i e

m

u s i c

or

2 Select the “Main” icon .

GRC

3 Enter the SETUP mode.

4 Select the “Input” icon.

(Select the icon)

(Select the icon)

If the CLIP indicator lights with analog input, set the input level to -3
or -6 dB to avoid sound distortion.

÷ This adjustment is not available with DVD 6ch INPUT.

÷ This adjustment is not available when the input mode is DIGITAL.

÷ The selected input level can be stored in memory on a per-selector

basis.

1 0 dB
2 -3 dB
3 -6 dB

Each press changes the level.

Input level

5 Select the “Attenuation” icon.

KHz T

F M

LW

MW

AUTO

TO STEREO

MO. TUNED

TE

S EON TP
Y TA NEWS

CLIP

PRO LO

A M

MHz S

DTS D

I N P U T

6

_

To quit the SETUP mode

GRC

Press the

icon.

(Select the icon)

(Select the icon)

(Select the icon)

If the input level of an analog source signal is too high or the AV control
center’s CLIP indicator lights, adjust the input level.

F M

LW

MW

AUTO STEREO
MEMO. TUNED

MUTE

RDS EON TP
PTY TA NEWS

A M

10 F T 4.5

CLIP