Kenwood C-V751 - Manual (Page 29)

29
Sound adjustment
Ajustment for surround play
(while listening to music) (SOUND)
1 BASS : Tone, Bass
2 TREBLE : Tone, Treble
3 C : Center speaker
4 LS/RS : Surround speaker, Left/Right
5 SW : Sub woofer
6 MIDNIGHT
÷ With the GRC, the adjustment items shown in a single menu can be
adjusted at once. (The adjustment steps 1, 2 are provided in a single
menu so they can be adjusted successively without changing the
menu screen.)
÷ 6 is available only with the Digital input.
Adjusting the tone (Stereo status only)
1
The display on the GRC disappears if no operation on the GRC
has been pressed for about 7 seconds.
GRC Each press of the SOUND key switches the indication.
s
o
u n
d
(Select the icon)
1 Enter the SOUND adjustment mode.
2 Select the "Tone" icon.
÷ The level can be adjusted between -10 and +10 in step of 2.
Bass tone level
Note Note Note
3 Touch to turn the tone setting on or
off.
KHz TIMER 1 2
F M
LW
MW
AUTO SOUND EREO
UNED
TP
NEWS
LIP
PRO LOGIC A M
MHz SLEEP
DTS DOLBY
T R E B + 2
Treble tone level
÷ The level can be adjusted between -10 and +10 in step of 2.
4 Touch the left or right arrow
next to a tone setting (treble or bass) to
adjust it. A readout
between the
arrows shows the current setting.
1 Select the "SP Level" icon.
(Select the icon)
Continued to next page
(Select the icon)
Adjust the volume levels for the speakers. (In other modes than stereo)
2
Main unit
To increase
To decrease
To increase
To decrease
÷ Adjustments 1 and 2 are not available in other modes than STEREO
and “Tone” is set to “On”.
÷ Adjustments 3, 4 and 5 are available only when the corresponding
speakers are set.
÷ The tone adjustment is not available with DVD 6ch INPUT. •
KHz TIMER 1 2 TA TA
F M F M
LW LW
MW MW
AUTO SOUND
PRO LOGIC
DIG DIG
A M A M
MHz SLEEP D
DIG DIG DTS DOLBY
DIG DIG B A s s
_ 2
Sound adjustment
÷ This adjustment is not available when DVD 6ch INPUT is selected.
This adjustment is possible only when the
PCM or Analog input is used and the listen
mode is set to STEREO.