KORG Speaker System - Manual (Page 89)

85
Basic functions
Song Play mode
In Song Play mode you can read Standard MIDI Files
(SMF)
directly from a floppy disk and play them. If
you simply want to play an SMF without editing it, it
will be convenient to select this mode.
● For details on how to access these pages or modes,
refer to “Basic operation of the TRITON” (
☞ p.12).
If the separately sold EXB-MOSS is installed, the
special bank F can be used in Song Play mode as
well. For details on the bank F parameters, refer to
the EXB-MOSS owner’s manual.
The parameter settings of Song Play mode are not
backed up when the power is turned off. If you
wish to save the program, track parameter, and
effect settings of the song, use the page menu com-
mand “Save Template Song” to save them. If you
wish to play SMF song data, you must first load it
from external media such as a floppy disk.
As shown in the diagram below, Song Play mode con-
sists of tracks 1–16, effects and arpeggiator.
About SMF
SMF data in format 0 or format 1 can be played back in
Song Play mode.
The TRITON recognizes only files with an extension of
.MID
as SMF data. Be sure that the filename extension
is .MID.
About MIDI
Track status settings in Song Play mode
You can select whether the musical data played by a
track, or the data produced by operating the TRITON’s
keyboard and controllers will sound the TRITON’s
internal tone generator, and/or will sound an external
tone generator.
When the “Status” of a track is set to INT, the data
played back by that track and the data produced by
operating the keyboard or controllers of the TRITON
will play and control the TRITON’s internal tone gen-
erator.
The pages in Song Play mode
P0: Program/Mix Play SMF data and make settings.
Specify the program, pan, and level for
each track.
P1: Track Make MIDI and scale settings for each
track. If the separately sold EXB-MOSS
option is installed, set related parame-
ters.
P2: Controller Setup Controller settings.
P3: Select Directory/
Jukebox
Select the directory that contains the
desired SMF, and select the playback
order of SMF files. Create jukebox lists.
P4: ---
P5: ---
P6: ---
P7: Arpeggiator settings
P8: Insert Effect Select and make settings for insert
effects. Make settings for the routing,
insertion effects, master effects, and
individual output assignments of each
track in the song.
P9: Master Effect Select and make settings for the master
effects. Master EQ settings.
The structure of Song Play mode
Insert Effect 1 ... 5 : P8
AUDIO OUTPUT
L/MONO, R
Master Effect 1, 2 : P9
AUDIO OUTPUT
INDIVIDUAL 1,2,3,4
MasterEQ : P9
Controller Setup : P2 Arpeggiator : P7
Routing : P8-1
Track
Insert Effect
Master Effect
Individual Outputs
Track 1 Parameter settings Musical data
Track 2 Parameter settings Musical data
Track 3 Parameter settings Musical data
Track 4 Parameter settings Musical data
Track 5 Parameter settings Musical data
Track 6 Parameter settings Musical data
Track 7 Parameter settings Musical data
Track 8 Parameter settings Musical data
Track 16 Parameter settings Musical data
Song Play mode