Kenwood HM-382MD - Manual (Page 61)

61
Application section
1
2
menu
down
volume/
multi control
up
down
volume/
multi control
up
set/demo
set/demo
Setting an everyday timer program
(PRG. TIMER)
Timer operation
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can
be set and selected to be activated or not as required.
Make preparations for the play (recording).
÷ Timer reservation is possible for the two types PROG.1 and PROG. 2 at the same time.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2 do
not overlap.
To listen to CD
Playing the auxiliary input source
To listen to MD To listen to tape
For recording To listen to radio
Make preparations for recording.
MD
•
TAPE
º
Make timer setting of the compo-
nent connected to the AUX input
jacks.
Set a tape into. Insert a disc.
(Program playback is not possible.)
The station should be preset prior
to the above.
¢
Load a disc.
(Program playback is not possible.)
Select the timer number.
(Press the set/demo key while
the “?” mark is blinking.)
1Select “TIMER SET ?”.
2 Select “PROG. 1 SET ?” or
“PROG. 2 SET ?”.
(Press during display of the pro-
gram contents.)
÷ The selected timer number lights.
÷ If the selected timer number has a previously set pro-
gram with it, the program will be overwritten by the
newly set program.
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
3 Set it.
Continued on next page
Adjust the clock before setting the timer.
O
Turning the knob switches the display contents.
TAPE RVS. ?
REC MODE ?
A.MEMORY ? (or AUTO PRESET)
(Only when the TUNER input is selected)
AUX INPUT
?
(Only when the AUX input is selected)
BALANCE
?
BACK LIGHT ?
A.P.S. SET ?
TIMER SET ?
Turning the knob switches the display contents.
1 O.T.T. SET ?
2 PROG. 1 SET ?
3 PROG. 2 SET ?