Kenwood HM-382MD - Manual (Page 55)

55
Application section
MD Edit Functions
TITLE
INPUT
P.CALL
SET
/CHARAC.
DISPLAY
SET
ENTER
TITLE
INPUT
[123] .....
Copying titles in title memos for use as titles of other MDs or tracks
To make character entry simpler, disc titles, track
titles and/or performer names can be saved in
title memos ([1] to [3]) and copied them with
another disc or track. The title memos can save
up to three sets of titles and/or input character
sets.
Always eject the MD after title entry or editing.
1 Press the TITLE INPUT key while the
MD recorder is in stop mode.
Copying a disc or track title in a title memo (TITLE COPY)
2 Select the save destination title memo
([1], [2] or [3]).
3 Enter the skip mode.
4 Select the title group [123] containing
the copy source title.
5 Select the disc or track title to be cop-
ied.
6 Save it in the save destination title
memo.
7 Press the TITLE INPUT key to complete
editing.
÷ To cancel TITLE COPY in the middle, press the TITLE
INPUT key on the remote.
÷ Press the DISPLAY/CHARAC. key repeatedly until title
memo selection menu appears.
÷ To copy other titles in other title memos, repeat steps 2
to 6 for each title.
8 Press the 0 MD key and eject the MD.
P.CALL
P.CALL
0
MD
÷ If a title memo has already been input, that title memo is
displayed.
÷ It is also possible to copy additional titles to the same title
memo by repeating steps 5 after steep 5.
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.