beautypg.com

Special features, Cd text information display, Md high-speed (2x-speed) dubbing – Kenwood HM-382MD User Manual

Page 4: Convenient recording features, Convenient timer features

background image

4

Preparation section

CD text information display

When discs conforming to CD-TEXT are played with this unit, the text information recorded on the CD (disc
name or titles) is displayed automatically.

¡

Some CDs conforming to CD-TEXT may not display text information.
Up to 1000 letters may be displayed. If the CD exceeds 1000 letters, "TEXT MEMORY FULL" will be displayed.

Special features

CD

=

MD high-speed (2x-speed) dubbing

A convenient feature enabling dubbing from CD to MD with simple operation and short period. (Applicable only
to CD all-track recording)

Convenient recording features

Versatile recording features are provided, allowing the user to select desired one for each purpose.

÷ One-touch recording : Pressing a single key starts recording of all tracks or a single track in a CD.

q

÷ TWIN recording

: Simultaneous recording of CD playback onto both MD and tape.

w

÷ Program recording : Your favorite tracks can be recorded in any desired order.

e

Convenient timer features

DEMO OFF (To cancel demonstration):

Press the

set/demo

key when DEMO is ON.

DEMO ON (To execute demonstration):

After turning power ON, press and hold the
set/demo

key (for more than 2 seconds).

In regard to demonstration

This unit is equipped with a demonstration func-
tion (only display). The demonstration consists of
sequential change of display and indicators show-
ing the operations, but the audio itself does not
change. The demonstration function can be can-
celled as follows.

÷ This operates automatically when a power failure

has occurred or the plug of the power cable has been
pulled while the power was ON.

Before applying power

set/demo

In addition to the 2-program timer, the timer also provides the following convenient features.

÷ AI timer

: When timer playback starts, the volume level increases gradually until a certain level is reached.

Œ

÷ O.T.T.

: Timer playback which occurs only once and only for an hour can be programmed by simply

setting the start time.

P

÷ Sleep timer

: Power of the unit can be switched off automatically after the set time has elapsed. Designed

for example for falling asleep while listening to music in the night time, etc.

´

O.T.T. ....... (Operate easy-To-use Timer)