Kenwood HM-382MD - Manual (Page 40)

40
Application section
1
2
menu
down
volume/
multi control
up
set/demo
PLEASE WAIT
74min.
STOP
7
Convenient Recording Methods
All-track high-speed recording
(CD
=
MD)
Records a CD onto an MD in a short period.
Be sure to put the MD recorder and cassette deck in stop mode.
Make the preparations for recording.
1 Select the CD input.
2 Ensure that "PGM", "REPEAT" and "REPEAT
ALL" are not lit.
3 MD : Insert a disc into the MD recorder.
4 Insert disc in the CD player.
Start recording.
1 Select ”REC MODE ?” then
” CD =MD ?”.
2 Start recording.
÷ High-speed recording starts with the first track in the CD
and continues until the last track.
÷ During high-speed recording, the CD playback audio is
played at a high speed and low volume.
÷ When either high-speed CD playback or MD high-speed
recording stops, the other operation also stops.
(Recording and playback will be
stopped.)
To interrupt a recording
÷ One high-speed recording starts, it is not permitted to
record the same disc with high-speed recording for 74
minutes after the start of recording. If you want to record
the same disc immediately, use one-touch edit recording
(recording at normal speed).
q
Time period until high-speed recording of the
same disc is permitted
Turning the knob switches the function as shown in
the character information display.
1 CD =MD ?
2 CD =MD ?
3 CD =TAPE ?
4 TWIN REC ?
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
The recorded audio may skip, noise may be recorded
on the MD or unnecessary tracks may be created
depending on the condition of the CD. In such a case,
restart recording at the normal speed.
÷ If the “PGM” indicator is lit, press the PGM/AUTO/
MONO key to turn it off.
÷ Press the REPEAT key repeatedly until the repeat mode
is switched off.