Kenwood HM-382MD - Manual (Page 14)

Basic section
14
3 3
2 2
1 1
1 1
down
volume/
multi control
up
3 3
Basic use method
Muting the sound temporarily
Bass and treble compensation Bass and treble compensation
Listening through headphones
1. Set the POWER( ) key to ON.
When the POWER( ) key is pressed while the unit is ON switches
it OFF. The standby/timer indicator lights red or amber.
÷ Pressing the CD 6, MD 6, AUX, TAPE 23 or TUNER/band key also
turns power on and starts playback (reception) of the corresponding input.
(One-touch operation)
÷ When the CD, MD or TAPE input is selected while the corresponding disc
or tape has been loaded, it immediately starts to play.
2. Selecting the desired output.
CD ^
MD *
TAPE ™
TUNER (Broadcasts) ¢
AUX (External input) I
"Adjusting the AUX input level" I
÷ Pressing the CD 6, MD 6, AUX, TAPE 23 or TUNER/band key selects
the corresponding input.
3. Volume adjustment.
÷ The display shows a reference value.
The volume
decreases The volume
increases
Example:
To select the CD input
CD
6
2 2
The system is switched
ON and STANDBY