Kenwood HM-382MD - Manual (Page 13)

Preparation section
13
30˚ 30˚
RC-M0100
Loading batteries
3 Close the cover. 1 Remove the cover. 2 Insert batteries.
÷ Insert two R6 (“AA”-size) batteries
following the polarity indications.
Operation
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between keys.
After plugging the power cord of this unit, press
the POWER (
) key of the remote control unit
to turn the system ON. When the system is
turned ON, press the key of the function to be
operated.
1.The provided batteries are intended for use in operation checking, and their service life may be short.
2.When the remote controllable distance becomes short, replace both of the batteries with new ones.
3.If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Notes Notes
Operating range
(approx.)
Remote sensor
6 m
the item selected with the “volume/multi control” knob.
ENTER key
This is used to execute an MD editing operation or to enter an
input title.
uR
It is also used to enter the preset station memory in the tuner.
∞
7STOP key
0 TAPE
23 key
MD 6 key
CD
6 key
TUNER/band key
! TAPE O.T.E. key/ MD O.T.E. key q
These keys are used for recording of a CD onto tape or MD
with a one-touch operation.
Press either key during CD playback to record the currently
played track onto tape or MD. Press in stop mode to record
the entire CD onto tape or MD.
@ VOLUME control keys
Press to control the volume.
$
Press to control the tone.
U
9 Basic operation keys
4P.CALL¢ keys
During CD or MD operation:
&(
Press to skip tracks in the forward or backward direction.
These keys are used in MD editing, input character selection.
During TAPE operation :
£
Press to select a preset station.
Press during TAPE operation to fast forward or fast reverse
the tape.
During TUNER operation:
¢
Press to select a preset station.
RDS operation (Only some areas) fl
1TUNING¡ (Fast forward, fast reverse) keys
During CD,MD or TAPE operation:
&(£
Press to search in the forward or backward direction.
Use these to move the cursor when inputting MD titles.
E
During TUNER operation:
¢
Press to select a radio station.
SET key
¤yQ
This is used to set an MD editing operation or to set or enter
Operation of remote control unit