Tape recording of sound with equalizer effect, Preparation, Set the tape switch to off – Kenwood G-EQ300 User Manual
Page 22: Select the “eq.on” mode, Create a desired equalizer pattern, Play the source to be recorded, Start recording it onto tape, Use of equalizer effect with tape
G-EQ300 (En/K)
2 2
Use of equalizer effect with tape
: Keys and control used in the operations described on this page.
1
Set the TAPE switch to OFF.
Tape recording of sound with equalizer effect
2
Select the “EQ.ON” mode.
3
Create a desired equalizer pattern.
4
Play the source to be recorded.
EQ. ON
2.5k
3.9k
6.3k
10k
16 k
400
625
1k
1.5k
250
40
63
98
160
“EQ, ON” Lights up.
Turns off.
In addition to ordinary recording, special equalizer recording
patterns (refer to page 14) can be used for effective playback
on car stereo or headphone stereo.
Preparation
Make preparation for recording.
●
For the preparation for recording, refer to the
instruction manuals of the cassette tape deck.
5
Start recording it onto tape.
To stop tape recording
See pages
@ to )
TAPE
Press the stop key of the cassette tape deck.
TAPE
EQ.EFFECT