Kenwood G-EQ300 - Manual (Page 15)

G-EQ300 (En/K)
1 5
1
Select the “graphic equalizer display mode”.
2
Select the “EQ.ON” mode.
Select the “PARAMETRIC” mode
3
Select the key to store the center frequency.
4
F1
PARAMETRIC
PARAMETRIC
EQ. ON
Creation of desired equalizer patterns
Equalizer curves can be created by setting up to 3 center
frequencies and the equalizing levels for them.
The inclination of each curve can be selected between WIDE
(gentle slope) and NARROW (steep).
(Continued on next page)
“PARAMETRIC” Lights up.
“F1” Lights up.
“EQ. ON” Lights up.
Operation in PARAMETRIC mode
Each press switches the display as follows.
1 GRAPHIC : Mode for adjusting equalizer curves.
2 PARAMETRIC: Mode for creating a curve according
to center frequencies.
Each press switches the display modes as follows.
1 Graphic equalizer display mode
2 Spectrum analyzer display mode
3 DEMO(Demonstration) mode
EQ.EFFECT
GRAPHIC/
PARAMETRIC
: Keys and control used in the operations described on this page.
F1 F2 F3
DISPLAY