Kenwood KRF-V9300D - Manual (Page 61)

English
61
Sound ad
justme
n
t
ACTIVE EQ MULTI CONTROL /O
ENTER
ACTIVE EQ
BASS BOOST
TONE
ENTER
MULTI CONTROL
O/
ACTIVE EQ mode ACTIVE EQ mode
The optimum acoustic field effect can be selected according to
the purpose of playback.
Press [ACTIVE EQ].
Each press switches the mode as follows:
Display Setting
"Active EQ Music" Effective when listening to music.
"Active EQ Cinema" Effective when watching a movie.
"Active EQ Game" Effective when playing a game.
"Active EQ Off" Active EQ function is off.
ACTIVE EQ indicator lights up.
Adjusting the Tone Adjusting the Tone
¶ Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo",
and also ACTIVE EQ mode is set to "Off".
1
Press [TONE].
2
Select whether or not the tone level is to be
adjusted.
Use [MULTI CONTROL ∞/5] to select "Tone On" or "Tone
Off".
[ENTER]
Display Setting
"Tone On" The tone level can be adjusted. Go to step 3 after setting.
"Tone Off" The tone level is not adjusted.
3
Adjust the level of "Bass" (low frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[ENTER]
The level is adjusted from –10 to +10.
4
Adjust the level of "Treble" (high frequencies).
Use [MULTI CONTROL ∞/5] to adjust the level.
[ENTER]
The level is adjusted from –10 to +10.
Bass Boost Bass Boost
¶ Operation available only on the remote control unit.
The Bass Boost can be adjusted when the input signal is a PCM
or analog signal and the listen mode of this unit is set to "Stereo",
and also ACTIVE EQ mode is set to "Off".
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Adjusting the sound