Kenwood KRF-V9300D - Manual (Page 31)

English
31
Set
u
p
The speaker settings can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in
fl.
EASY SETUP
ENTER
MULTI CONTROL
O/
1
Press [EASY SETUP] to enter the easy setup mode.
2
Set the listening room size.
Use [MULTI CONTROL ∞/5] to select your room type.
[ENTER]
Reference for listening room size
3m (9'10-3/8")
4m (13'1-7/8")
5m (16'5-3/8")
4m (13'1-7/8")
6m (19'8-7/8")
7m (23'3/8")
Small
12m 2 24m 2 35m 2
Medium Large
3
Select the listening position.
Use [MULTI CONTROL ∞/5] to select your listening
position.
[ENTER]
Reference for listening position
Front
Center
Rear
The speakers are set up as shown below.
Subwoofer :
\ ON
Front speaker:
\ "FRNT Normal" in
Setup"–> of manual setup
Center speaker:
\ "CNTR Normal" in
Setup"–> of manual setup
Surround speaker:
\ "SURR Normalx2" in
Setup"–> of manual setup
Surround Back speaker:
\ "SB Normal" in
> of manual setup
Subwoofer Re-mix :
\ ON
For details on the setting contents, see –"Manual Setup"–>
fl.
• Easy setup with may not be appropriate with certain speaker
systems or listening environment. In this case, go through
fl.
• Easy setup can set only the 7.1 channel system. If the setup for
the 5.1-channel or 6.1-channel system is required, go through
fl.
KRF-V7300D Speaker setup –"Easy Setup"–