Kenwood KRF-V9300D - Manual (Page 28)

28
KRF-V9300D/KRF-V8300D/KRF-V7300D
Co
n
n
e
c
ti
o
n
s
AM loop antenna AM loop antenna
1
Attach to the stand.
2
Push the lever.
3
Insert the antenna cord.
4
Release the lever.
L
R
AUX CD MD/TAPE VIDEO1
ANTENNA
VIDEO2
AUDIO
FRONT SPEAKERS (6 – 16 )
FRO PLAY IN PLAY IN REC OUT PLAY IN PLAY IN PLAY IN REC OUT
RED WHITE
AM
SPEAKER A SPEAKER B
GND FM 75
L R L R
AM GND FM 75
Connecting antennas
The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
AM loop antenna
Install in a position as apart as possible from this unit, the TV monitor,
personal computer, speaker cords and power cord, and place in an
orientation that can offer the best reception condition.
FM indoor antenna
Fix on a wall, etc. with a good reception condition.
The provided antenna is intended for temporary
use in indoors. To obtain stable FM reception, it
is recommended to use an outdoor antenna. Be
sure to disconnect the indoor antenna when an
outdoor antenna is installed.
Twist the
conductors into
a single bundle
before connection.
FM indoor antenna FM indoor antenna
1
Insert the antenna cord.
FM outdoor antenna FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75Ω terminal.
Insert into the groove.
FM outdoor antenna
(commercially available)
FM antenna adapter
(commercially available)
Insert until the metallic
conductor becomes invisible.