Kenwood KRF-V9300D - Manual (Page 16)

16
KRF-V9300D/KRF-V8300D/KRF-V7300D
Co
n
n
e
c
ti
o
n
s
Connecting a TV Monitor
1
Connect the TV monitor by selecting one of the desired method from connections B, C, D and E shown on
the right page.
For the video and audio connections of the connected component, see the description on the page for the connected components.
KRF-V9300D and KRF-V8300D:
This unit is capable of up-conversion of video signals.
For KRF-V9300D, when the TV monitor is connected to this unit through HDMI connection (connection B), any video signal input to
this unit can be output at the HDMI monitor output terminal.
For KRF-V8300D, VIDEO and S-VIDEO signal can be converted to COMPONENT VIDEO signal (connection
C).
For details, see *.
2
To output the audio of the TV monitor from the speakers connected to this unit:
Use connection A (digital) or F (analog).
Use the digital connection (connection A) to enjoy digital surround broadcasting, etc. in a surround system environment.
• The HDMI video cannot be viewed unless the TV monitor is equipped with the HDMI terminal.