Kenwood KRF-X7775D User Manual
Page 88
80
Mo
ving Around
T
roubleshooting
I can’t receive a radio station
Check that:
•
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
•
The broadcast band is correct. See “Radio Tuning” on page␣ 44 of
this manual.
•
The tuner is set to the correct frequency. See “Radio Tuning” on
page␣ 44 of this manual.
I’m getting a lot of static/interference
•
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
•
Adjust the antenna for best reception.
•
If you live in an area with weak FM signals, consider a rooftop FM
antenna (available at any home electronics store).
When I press a button to tune to a preset station, the receiver
does not respond
Check whether:
•
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page␣ 76 of this manual.
•
The Tuner input is selected. See “Radio Tuning” on page␣ 44 of this
manual.
Receiver/Tuner