Kenwood XXV-01D User Manual
Page 57
English
|
57
The messages shown below display your
systems condition.
Eject:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
No Disc:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
TOC Error:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is very scratched.
➪ Clean the CD and load it correctly.
Error 05:
The CD is upside-down.
➪ Load the CD correctly.
Blank Disc:
Nothing has been recorded on the MD.
No Track Disc: No tracks are recorded on the MD,
although it has a title.
Error 15:
Media was played that does not have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
No Panel:
The faceplate of the slave unit being
connected to this unit has been removed.
➪ Replace it.
Error 77:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If
the "Error 77" code does not disappear,
consult your nearest service center.
Mecha Error:
Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
➪ Check the disc magazine. And then
press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
Hold Error:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
Waiting:
Text for the DAB tuner source is being
received.
Load:
Exchanging discs in the Disc changer.
Reading:
Reading the data on the disc.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Unsupported File:
An Audio file with a format that this unit
cannot support is playing.
➪ ----
Copy Protection:
A copy-protected file is playing.
➪ ----
Can't Download:
Download Error:
This unit does not work properly for some
reason.
➪ Press the reset button to download
it again. If this error is still displayed,
consult a local Kenwood dealer.
No Display File: No file that can be downloaded is
contained in the CD-ROM.
➪ Make sure that a files created with
referring to
Do not delete the extension (.kbm)
created when the file was created.
Incorrect File:
The file selected to be downloaded has a
format that this unit cannot read.
➪ Recreate the file.
Writing Error:
Writing failed while the file was
downloaded.
➪ Try the downloading again.