beautypg.com

Kenwood XXV-01D User Manual

Page 39

background image

English

|

39

Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.

1

Enter Standby

Press the [SRC] button.
Select the "STANDBY" display.

2

Enter Menu mode

Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.

3

Enter Security Code mode

Press the Control knob for at least 1 second.
When "Enter" is displayed, "CODE" is also
displayed.

4

Select the digits to enter

Push the Control knob towards [

4] or

[

¢].

5

Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

6

Repeat steps 4 and 5, and complete the

Security Code.

7

Confirm the Security Code

Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "CODE" is also
displayed.

8

Do the step 4 through 7 step operation, and

reenter the security code.
"Appoved" is displayed.
The Security Code function activates.

• If you enter a Code different from your Security Code,

you have to start over from step 4.

9

Exit Security Code mode

Press the [MENU] button.

Press the Reset button when the audio unit is
removed from the battery power source

1

Turn the power ON.

2

Do the step 4 through 7 step operation, and

reenter the security code.
"Appoved" is displayed.
You can begin using the unit.

• If an incorrect code is entered, "Waiting" is displayed,

and the input prohibition periods shown in the table
below is generated.
After the input prohibition time lapses, "CODE" is
displayed, and you can reenter the code.

Number of times the
incorrect code was input

Input prohibited time

1

2

5 minutes

3

1 hour

4

24 hours

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.

Display

Setting

"Beep: ON"

Beep is heard.

"Beep: OFF"

Beep canceled.

In Standby mode

Manual Clock Adjustment

1

Select Clock Adjustment mode

Push the Control knob towards [

4] or

[

¢].

Select the "Clock Adjust" display.

2

Enter Clock Adjust mode

Press the Control knob for at least 1 second.
The clock display blinks.

3

Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [

4] or

[

¢].

4

Exit Clock adjustment mode

Press the [MENU] button.