Kenwood XXV-01D - Manual (Page 40)

40 | English
Menu system
In Standby mode
Date Adjustment
1 Select Date Adjust mode
Push the Control knob towards [ 4] or
[ ¢].
Select the "Date Adjust" display.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob towards [
4] or
[ ¢].
The items that are blinking are items that you
can adjust.
4 Adjust each item
Push the Control knob towards [FM] or [AM].
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Date Mode
Setting the date format.
1 Select Date Mode
Push the Control knob towards [ 4] or
[ ¢].
Select the "Date Mode" display.
2 Select the date format
Push the Control knob towards [FM] or [AM].
3 Exit Menu mode
Press the [MENU] button.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"DSI: ON" LED flashes.
"DSI: OFF" LED OFF.
In Standby mode
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
"Button: Green" The illumination color is green.
"Button: Red" The illumination color is red.
• You can change the illumination color of [EJECT],
[NEXT], [AUTO], and [ATT] buttons.
In Standby mode
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer: ON" The display dims.
"Dimmer: OFF" The display doesn’t dim.
In Standby mode
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"Contrast: 1"
…
"Contrast: 4" (Original setting)