Kenwood XXV-01D - Manual (Page 15)

English | 15
• The frequency which can be selected by each
Frequency band is shown below.
Band Frequency
Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz)
Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz)
Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
• To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
(page 13).
6 Exit Equalizer Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
WOW Control
1 Select the source to adjust
Press the [SRC] button.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "SRS
WOW" appears.
Refer to (page
8).
3 Enter WOW Control mode
Turn the [VOL] knob to select "SRS WOW".
Press the [VOL] knob.
• When "2ZONE" of (page 10) is ON, you
cannot select "SRS WOW".
4 Select the WOW Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item WOW Control Item
"Effect" Effect
"FOCUS" FOCUS
"TB-F" TruBass Front
"TB-R"* TruBass Rear
"SRS 3D" SRS 3D
• * You can control this item when Speaker Select Rear
of (page 13) is set to
any item other than "None".
5 Adjust the WOW control item
Push the Control knob towards [ 4] or
[ ¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
WOW Control Item Range
Effect Middle/High/User/Through/Low
FOCUS OFF/1 — 9
TruBass Front OFF/1 — 4
TruBass Rear OFF/1 — 4
SRS 3D OFF/1 — 4
• Effect: TruBass, FOCUS and SRS 3D are all set to values
shown in the table below.
Effect TruBass FOCUS SRS 3D
High 4 8 4
Middle 3 6 2
Low 2 3 1
• FOCUS: Adjusts the vertical position of the front
speaker and sound image by virtual
adjustment.
• TruBass: Assists the playback for the super bass sound.
• SRS 3D: Makes a natural 3D sound field.
• You cannot set SRS 3D in tuner source.
6 Exit WOW Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
• To get the best sound, first set the Speaker select.