General features, Equalizer control 1 – Kenwood XXV-01D User Manual
Page 14
14
|
English
General features
Equalizer Control
1
Select the source to adjust
Press the [SRC] button.
2
Show the Multi-function display
Press the [NEXT] button repeatedly until "EQ"
appears.
Refer to
8).
3
Enter Equalizer Control mode
Turn the [VOL] knob to select "EQ".
Press the [VOL] knob.
• When "2ZONE" of
cannot select "EQ".
4
Select the Equalizer Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item
Equalizer Control Item
"SystemQ"
System Q Setting
"Front"
Equalizer Front Setting
"Rear"*
Equalizer Rear Setting
"Preset"
Preset value storage/recalling
• "Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
can recall it by selecting "Recall". Refer to
• * You can control this item when Speaker Select Rear
of
any item other than "None".
5
Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob towards [
4] or
[
¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound setting
Display
User memory
"User"
Natural
"Natural"
Rock
"Rock"
Pops
"Pops"
Easy
"Easy"
Top 40
"Top40"
Jazz
"Jazz"
•
User memory:
The values set on the
• Change each setting value with the Management system> (page 13). Equalizer Front Setting/ Equalizer Rear Setting Press the Control knob. 2 Select the items to adjust for Equalizer. Press the [FM] or [AM] button. 1 2 Equalizer Control Item "Band1"/ "FREQ" Equalizer Frequency "Level" Equalizer Level "Q Factor" Equalizer Quality 3 Adjust the Equalizer. Push the Control knob towards [ 4] or [ ¢]. Each time you push the knob, the setting Equarizer adjustment item Range Equalizer Front Frequency/ Refer to the followings. Equalizer Front Level/ –9 — +9 Equalizer Front Quality/ 0.25/ 0.50/ 1.00/ 2.00
First, select the speaker type with the Speaker setting.
1 Select a frequency band you wish to adjust
Each time you press the button is pressed, the
band alternates between "Band 1" and "Band 4".
Each time you press the button is pressed, the
item to be adjusted alternates between the
items shown in the table below.
"Band2"/
"Band3"/
"Band4"
alternates between the settings shown in the
table below.
Equalizer Rear Frequency
Equalizer Rear Level
Equalizer Rear Quality