Kodak i30 / i40 - Manual (Page 27)

24 A-61512 May 2006
Kodak Button
Manager
Kodak Button Manager allows you to assign an associated application
with the numbers (1 through 9) displayed in the function window on the
scanner. Once the numbers are assigned, you can launch scanning
applications and utilities by using the Start button on the control panel.
Up to 9 different applications can be launched.
After the scanner, software drivers, and application software are
properly installed and the PC has been rebooted, a scanner icon will be
displayed on the system tray.
• Click on the scanner icon to display a listing of the predefined button
assignments.
You can click on one of the functions to launch the application or you
can select Configure to assign or reassign a function.
Configuring functions The Configuration dialog box allows you to set or change the
applications associated with the function number. When you select
Configure from the Kodak Button Manager menu, the Configuration
dialog box will be displayed.
Select a Scanner Event — select the number (1 through 9) that you
want to assign an application to.