Kodak i30 / i40 - Manual (Page 16)

A-61512 May 2006 13
Connecting the USB
cable IMPORTANT: If you have not installed the Kodak Driver Software,
do that now before proceeding.
The following instructions explain the connection of the USB cable
between your scanner and PC. You need to identify the USB port on
your PC. If you installed the USB 2.0 card, use that port, otherwise use
the USB port on your PC.
The USB cable supplied with your scanner has two different ends.
1. Attach the B end of the USB cable to the scanner USB port, located
on the back of the scanner.
2. Attach the A end of the USB cable to the proper USB port on your
PC.
NOTE: If you installed a USB card, use one of those ports, or use your
PC’s USB port. See your PC manufacturer’s documentation for
the location of the USB port.
Turning on the scanner
and finalizing Kodak
Driver Software
installation When the USB cable and power connections have been made, and the
Kodak Software Drivers have been properly installed, the installation
will be complete when the scanner is turned on.
B
A