Kenwood TM-271A - Manual (Page 69)

62
11
TIME-OUT TIMER
The Time-out Timer limits the time of each transmission
to a maximum of 3, 5, or 10 (default) minutes. Just
before the transceiver stops the transmission, a warning
beep sounds. This function is necessary to protect the
transceiver from thermal damage and can therefore not
be turned OFF.
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 21 (TOT).
2 Press [MENU] and turn the Tuning control to select
“3”, “5” or “10” (default) minutes.
3 Press [MENU] to store the setting or any other key to
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
Note: A warning beep sounds even if you set Menu No. 24 (BP) to
OFF {page 55}.