Kenwood TM-271A User Manual

Page 11

2 Connect the transceiver’s DC power connector to the

connector on the DC power cable.

• Press the connectors firmly together until the locking tab

clicks.

Note:

◆

For your transceiver to fully exhibit its performance capabilities,

we recommend using the optional PS-33 (20.5 A, 25% duty cycle)
power supply.

◆

Before connecting the DC power supply to the transceiver, be

sure to switch the transceiver and the DC power supply OFF.

◆

Do not plug the DC power supply into an AC outlet until you make

all connections.

IXED

TATION

PERATION

In order to use this transceiver for fixed station operation,
you will need a separate 13.8 V DC power supply (not
included). The recommended current capacity of your
power supply is 12 A.

1 Connect the DC power cable to the regulated DC

power supply and ensure that the polarities are
correct (Red: positive, Black: negative).

• Do not directly connect the transceiver to an AC outlet.

• Use the supplied DC power cable to connect the

transceiver to a regulated power supply.

• Do not substitute a cable with smaller gauge wires.

To AC outlet

Regulated DC
power supply

Black (–)

Red (+)

Fuse holder

This manual is related to the following products:

TM-271E