Kenwood TM-271A - Manual (Page 18)

11
3
y
Appears when the Automatic Simplex Check (ASC)
function is activated {page 26}.
u
Appears when the Priority Scan function is activated
{page 43}.
i
Appears when the Weather Alert function is activated
{page 36}. (K market models only.)
o
Appears when narrow FM Mode is selected {page 60}.
!0
Displays the frequencies, Menu settings, Memory name
and other information.
!1
Displays the Menu No., Memory Channel number, and
status {pages 18, 29}.
!2
Appears when the displayed Memory Channel has data
{page 29}.
!3
Appears when the Key Lock function is ON {page 58}.
!4
Appears when the Memory Channel Lockout function is
ON {page 44}.
!5
Shows the strength of transmitted {page 15} and received
{page 54} signals.
indicates the squelch is open and the frequency is
“busy”. It also appears when the squelch is set to
minimum {page 14}. If using CTCSS or DCS, it indicates
the squelch is open due to a received signal that
contains the same CTCSS tone or DCS code that is set
in your transceiver.
acts as an S-meter while
receiving and an RF power meter while transmitting.
indicates the transceiver is transmitting.
!6
Appears when the function key is pressed.
!7
H appears when high power transmission is selected
and L appears when low power is selected {page 15}.
(“M” is not used on this transceiver.)